Floating Effluent Decanters

The MTS floating effluent decanters are designed to allow the removal of the supernatant liquid at the liquid surface of sequencing batch reactors and aerobic digesters. The MTS design allows the decant arm to stay close to the liquid surface through the high and low decant liquid level range.

Decant rates are typically up to 1,200 GPM.

The MTS decanter system consists of a decanting arm, cast iron swing joint, and stainless steel supports and hardware. The decant arm can be fabricated of either stainless steel or fiberglass reinforced plastic.

Connect With Us

Phone: 508-660-9150
Fax: 508-660-9151

Meet With Us

Mass Transfer Systems
23 Walpole Park South
Walpole, Massachusetts 02081 USA
[email protected]